Unofficial File parts/s/18590s01.dat
part image
File Header:
0 ~Technic Gearwheel Z8 with Pin Holes, Flywheel Socket and Short Shaft - One Half
0 Name: s\18590s01.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 // Primitives
Status:
Needs more votes. (N)
Size: 41518 bytes
Reviewers' certifications:
(no current reviews for this file)
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
File reviews and updates:
At Mon Apr 13 08:11:32 2020, the file was initially submitted.
Submitted by: Sirio
At Mon Apr 13 10:15:00 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
I see no reason to use hi-res prims in such a small part

At Tue Apr 14 15:20:01 2020, the following review was posted:

Reviewer: Sirio
Certification: novote
Comments:
I used the same resolution as the 18591 counterpart.
I believe that at least on the external surface it must be maintained; we can talk about it for the central conical part and for the cylindrical area around the gear

At Tue Apr 14 15:40:01 2020, the following review was posted:

Reviewer: OrionP
Certification: novote
Comments:
test review

At Wed Apr 15 10:00:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Yes, OK. The big cylinder should match the corresponding part.
I don't see a need for it in the centre cylinder or the connhole, or the cutouts.
The soft transition from cyli to cone is another example

At Wed Apr 22 06:40:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Reduced number of sides.

Existing certification-votes were deleted.
At Sun Apr 26 17:00:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Wrong parttype.

I see no good reason to keep these:
3 4 10 36 3.0172 10 35.1539 3.8837 9.9525 35.1539 4.1226
3 4 10 35.0752 4.1423 9.9525 35.1539 4.1226 10 35.1539 3.8837
3 4 10 34.409 4.9106 9.9525 35.1539 4.1226 10 35.0752 4.1423
Should be simplified

At Fri May 1 06:20:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Fri May 8 09:05:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
You need to adapt the other end of that area, so that it matches the rotated other subfile.
4 16 10 35.139 -3.8837 10 35.1539 3.8837 10 36 3.0172 10 36 -3.0172
4 16 10 34.409 -4.9106 10 34.409 4.9106 10 35.1539 3.8837 10 35.0752 -4.1423
3 16 10 35.0752 -4.1423 10 35.1539 3.8837 10 35.139 -3.8837

Edger2 added 20 more condlines.

At Sun May 10 13:45:02 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Fixed the connection areas.

The 20 condlines identified with edger2 are mostly duplicates.

I added only 4 of those to the modified surfaces for the intersection between cones and vertical planes because now the surfaces are no longer planes.

The others I have not considered. The condlines that I put are longer than those identified with edger2 and partially overlap those of the cylindrical primitives.

Existing certification-votes were deleted.