Unofficial File parts/96858.dat
part image
File Header:
0 Minifig Tool Fishing Rod 12L Straight End
0 Name: 96858.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !CATEGORY Minifig Accessory

0 !HISTORY 2013-08-14 {LEGO Digital Designer} Original part shape
0 !HISTORY 2019-11-14 [Sirio] File preparation for LDraw Parts Tracker

0 // Handle
Status:
Needs more votes. (N)
Size: 5829 bytes
Reviewers' certifications:
(no current reviews for this file)
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Tue Nov 19 21:00:01 2019, the file was initially submitted.
Submitted by: Sirio
At Wed Nov 20 15:55:01 2019, the following review was posted:

Reviewer: SLS
Certification: novote
Comments:
About the description:
1. The other fishing rod (2614) is a "Minifig _Tool_ Fishing Rod".
2. Maybe add a difference with 2614 ("straight end" vs "inclined end" or something about the split stud on the reel?).
3. "10L" without the space, no?
4. Besides, 10L is from the reel/moulinet, it's more 12L whole (though TLG says 10M, BL says 12L) .
5. Is the size in LDU necessary?
At Thu Nov 21 22:30:01 2019, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Fixed the description.

Existing certification-votes were deleted.
At Fri Nov 22 09:35:01 2019, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
You should not use stud2 here but stud2a + 4-4edges. Otherwise, with some viewers/renderer you get a LEGO logo floating in mid-air...
There are weird things at the tip of the rod:
- condlines between cyls and con19 seem to have weird control point since they always appear.
(eg. 5 24 -1.34349 -232.0003 1.34349 -.72713 -232.0003 1.75541 -1.4142 -205.417 1.4142 -.72713 -235.8478 1.75541).
- intersection line between cyls and end cylinder do not match the surfaces, it seems to have been calculated for a highres version of the part)
At Tue Nov 26 18:00:01 2019, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Replaced stud2 with stud2a and 4-4edge.

As for the upper zone, there is some confusion:
1 - The lines between con19 and cyls are a 4-4edge and this is why it is always visible. For simplicity I put the final part as cylindrical and therefore the intersection of the vertical cone and vertical cylinder generates an edge.
2 - The lines of intersection between horizontal cylinder and vertical cylinder (cyls) are made by considering hi-res surfaces so that they are visible even when the render makes the replacement. After Philo's comment I have verified that the hi-res surface of cyls is missing and therefore this is useless.
At this point, since I have to modify the final zone anyway, I see some possible solutions:
a - I introduce the primitive 48 cyls and leave this file as it is;
b - I make an intersection between 48-sided horizontal cylinder and 16-sided vertical cylinder (but if at a certain point the primitive 48 cyls is introduced we will have to revise it);
c- I abort the use of cyls and I introduce in this part the 48 facets that are used to close the surface (in the case one could maintain the conical surface and eliminate the edge 4-4edge at the end of con19 and there would be small holes if the render uses the hi-res version for con19 or not);
d - I completely draw the intersection between the horizontal and vertical cylinder (48 or 16 sides) without using the primitives, using only a horizontal 3-4 cylinder for the area not affected by the intersection.
Existing certification-votes were deleted.
At Tue Nov 26 19:40:02 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
The general rule of thumb is to use normal res prims and calculate intersection with them. Benefit of high level primitives substitution is to provide high quality renders, in general they aim to be realistic, thus don't show edges anyway.

At Thu Nov 28 18:50:02 2019, a new version of the file was submitted.
Submitted by: Sirio
Comments:
16-sided intersection lines introduced.

Existing certification-votes were deleted.
At Tue Dec 3 22:30:01 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Wed Dec 4 08:55:02 2019, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
This edge 1 16 0 -232 0 1.9 0 0 0 1 0 0 0 1.9 4-4edge.dat overlaps condlines. I think the 4-4edge should be removed.

At Wed Dec 4 17:05:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
I was thinking: Why are they both called "... with Straight End" ?
I think the 2 long rods need a qualifier, "... Straight/Angled End", and the shorter one could do without, or maybe use "... with Clip End".

And it looks like the length is aslo not correct. They're 12L long.
1 11 0 0 0 1 0 0 0 1 0 0 0 1 2614.dat
1 36 16 6 0 1 0 0 0 1 0 0 0 1 93222.dat
1 46 -16 22.5 0 1 0 0 0 1 0 0 0 1 96858.dat
1 12 -16 -80 20 0 -1 0 -1 0 0 0 0 -1 4477.dat
1 13 -16 -200 20 0 -1 0 -1 0 0 0 0 -1 3023.dat

Should the 2 long rods have the same origin? In the middle of the handle.
Maybe all 3 could have a similar origin? Aligning the spinning reel.

At Thu Dec 5 19:25:01 2019, a new version of the file was submitted.
Submitted by: Sirio
Comments:
I moved the origin: now for all fishing rods the reel is at 0 -24 -16 from the origin.

I modified the lengths indicated in the description and the indication of the end. If you have other ideas, change as you like.

Existing certification-votes were deleted.