Unofficial File parts/38340.dat
part image
File Header:
0 Train Wheel with Pin for Wheel Bogie (needs Work)
0 Name: 38340.dat
0 Author: Gerald Lasser [GeraldLasser]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Status:
1 'hold' vote. (HN)
Size: 3812 bytes
Reviewers' certifications:
GeraldLasser=novote
MagFors=hold
Philo=novote
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
Train Wheel Bogie With Pin Slots with Wheelset Black
Status: 2 subfiles aren't certified. (SSN)
Train Wheel Bogie With Pin Slots with Wheelset Red
Status: 2 subfiles aren't certified. (SSN)
Train Wheel Bogie With Pin Slots with Wheelset
Status: 3 'hold' votes. (HHHSSN)
File reviews and updates:
At Thu Dec 26 00:00:01 2019, the file was initially submitted.
Submitted by: GeraldLasser
Comments:
This is -needs work- as the pin diameter on the outside is still too much and the extrusions from the axle need to be refitted due to reducing the diameter from 7.5 to 7 LDU

I made the wheel based on 48 segmented prims due to the size (larger than 20 LDU)

At Thu Dec 26 10:10:01 2019, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
or should it be - with Bar- as this is a roulghy 8 LDU connection?

At Thu Dec 26 12:55:01 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Imho, "with bar" should be used only if it exactly fits clips and bad holes. otherwise it's misleading.

At Wed Jan 1 18:15:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
I don't see why it can't be finished. Please close the gaps and add the missing edges.
The other two train wheels are made in normal res primitives, so why not this one too?
Or maybe a reworked, even more used, common subfile for all three versions?

At Wed Jan 1 22:30:01 2020, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
see here: https://forums.ldraw.org/thread-23790-post-35163.html#pid35163

There's some detail on the back of the wheel which I modeled, but for a normal trains does not add value, using the wheel differently (greebling) it is another case...

I made them to 48 prims, because they are larger than 20 LDU

A common subfile for all three versions does not work, the new one runs on a flat surface, whereas the old one runs on a conical surface.