Unofficial File parts/18973p06.dat
part image
File Header:
0 Windscreen  6 x  4 x  1.333 Curved with Bugatti "Chiron" Roof Pattern
0 Name: 18973p06.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Status:
Needs more votes. (CN)
Size: 26156 bytes
Reviewers' certifications:
MagFors=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sun Apr 15 12:05:00 2018, the file was initially submitted.
Submitted by: Sirio
Comments:
In an initial phase I would like to talk only about the graphic aspect and the dimensions of the decorations.
Surely there will be errors of realization, but at least at the beginning it is useless to check that all the triangles are correctly connected for 0.0001 if then it is necessary to move a line of 1 or more unit.

Roof middle stripe 48 sided circle centre (112.7469 -19.9503) radius 113.7469
Roof side stripe 1 at 30
Upright lateral side 48 sided circle centre (111.8224 -40) radius 78.8224
Circle junction 16 sided circle centre (-28 - 40) radius 5
Roof line straight at 35

Projected along y axis with Projector.exe

At Sat Dec 28 17:00:02 2019, the following review was posted:

Reviewer: Steffen
Certification: certify
No comments were posted with this review.

At Mon Dec 30 15:30:01 2019, the following review was posted:

Reviewer: UR
Certification: hold
Comments:
...invisible condlines...6 in number...
further on 2 quads near to coplanarity...

please check in LDPE
At Mon Dec 30 15:45:02 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
The pattern on p02, the only one I have, was very wrong in position.
I don't want to Hold-vote these on a suspicion, but I want to make clear that the position might be very wrong too.
Could someone please check the position of the pattern?

At Fri Jan 10 22:25:02 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
I added the note Needs work, in the description and inside the part, to try to unlock the situation.
As done for other parts, we could approve a partial version with the possibility of making it definitive in the future. Especially since any changes do not affect the coupling of the component with other pieces, but only the graphic aspect.

I eliminated also some useless vertex and joined some faces, based on the notes made.

I send to Chris a new version of the reference part, because I moved the conditional lines from the main part to the subpart as is being done elsewhere (43898, 65633).
This allows to reduce the dimensions of the patterned parts and the possibility of errors.
On this occasion I also made some small changes (cancellation of some conditiona lines) that were incorrect in LDPE.
some error indications in the printed parts were due to the conditional lines of the reference part which were in excess and had been copied as they were.

Existing certification-votes were deleted.
At Mon Mar 30 21:15:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Please do some meassurements on this image
https://www.flickr.com/photos/brothers-brick/33121456575/
The roof line is not correct.

At Wed May 20 06:45:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Sat May 30 15:05:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
The pattern looks good now, but there's 2 vertices that are not connected to the structure of the subfile.
0 !LPE VERTEX 38.636 14.116 -62.764
0 !LPE VERTEX -38.636 14.116 -62.764

And you have a full set of condlines here too, that you moved to the subfile. Right?
At Sat May 30 15:15:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
There are some T-junctions and unnecessary vertices that could be eliminated.....

At Sun May 31 22:20:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Removed conditional lines (are in the subpart).
Removed vertices 38.636 14.116 -62.764 and -38.636 14.116 -62.764.

I have not found any T-Junction.
The vertices along the outer edges and along the strips that do not represent the vertices of the basic structure but are close enough, must not be removed. they are used to follow the correct curvature of the line.

Existing certification-votes were deleted.
At Tue Jun 9 21:15:01 2020, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
I don't understand why you want to keep these:
2 4 28.284 1.536 -32.071 29.813 1.521091 -31.4325
2 4 29.813 1.521091 -31.4325 30.28158 1.536 -31.50216
2 4 30.28158 1.536 -31.50216 31.0614 1.612448 -31.6181
2 4 31.0614 1.612448 -31.6181 31.736 1.536 -31.088
2 4 29.149 .5531631 -18.4429 30.3998 .5725968 -18.5666
2 4 30.3998 .5725968 -18.5666 36.956 .2354 -13.827
2 4 22.22012 3.981392 -44.87978 24.352 4.106872 -44.74497

At Thu Jun 11 06:05:02 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Tue Jul 7 20:50:02 2020, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Thanks